Breville Professional 800 Series 800ES, 800ESC, 800ESR, BES820
Won't fit: ☹️
Breville Prima latte
Breville Sage Barista Max vcf126x Search for EM5300150
Sunbeam Arista EM5900
Sunbeam Bar Espresso EM3500
Sunbeam Cafe Crema EM4800
Sunbeam Cafe Espresso EM3800
Sunbeam Cafe Latte EM5400, EM5600
Sunbeam Cafe Series EM5800
Sunbeam Mini Barista Espresso EM4300 Search for EM5300150
Sunbeam Barista Max Espresso Maker EM5300 Search for EM5300150
How to replace a Breville Sage gasket
All you need is an awl and an Allen key
Press the POWER button to switch the machine off and unplug the cord from the power outlet.
Carefully remove the water tank and drip tray, taking particular care if they are full.
Using a skewer or similar, clean the centre of the screw of any residual coffee.
Insert the shorter end of the Allen Key into the centre of the screw. Turn counterclockwise to loosen the screw.
Once loosened, carefully remove and retain the screw and stainless steel shower screen. Make note of the side of the shower screen that is facing downwards. This will make re-assembly easier. Soak the shower screen in warm water and Puly Urnex or Cafetts detergent - rinse thoroughly.
Remove the silicone seal with your fingers or an awl. Insert the new seal, flat side first, so the ribbed side is facing you.
Re-insert the shower screen, then the screw. With your fingers, turn the screw clockwise for 2-3 revolutions then insert the Allen Key to tighten until the screw is flush with the shower screen. 8. Re-insert the drip tray and water tank
When to replace:
When the coffee starts to overflow from the handle when making a coffee. You won't have the correct pressure to extract the coffee, leaving a diluted watery taste in the coffee.
There are 5 reviews with an average rating of 5.00
Galway, Ireland
